Process Control Devices

Turbine Flow Meter Manufacturers in India Process Control Devices  manufacture various digital flow meters used in industry as per fluid property. Turbine flow meter is used for measuring the instant flow rate of clean liquid as well as gas. It consists of turbine rotor mechanism, pickup coil, and an electronics module. the velocity of flow is directly proportional to the flow rate. Media it can measure is water, oil, diesel, solvent, chemical, and any clear liquid. viscosity should be less than 20 CP. Buy turbine flow meter in Mumbai at best price Electronics Specifications Programming : By Membrane Key Power Supply : 24 VDC Isolated, 230 VAC, 110VAC Out Puts : 4-20mA, 4wire, Pulse, Communication  : RS 485 MODBUS Accuracy : ± 1% of FSD & ± 0.5% on request Linearity : +/- 0.5 % Repeatability : 0.5% Process Parameters Fluid : Liquids Sp. Gravity : Up to 2.95 Viscosity :  Up to 100 CP Design Pressure :  Up to 100 Kg/Cm2 Measuring Range:  0.2 to 350M3/hr Mechanical Specification Line

Capacitive level sensors   are operated by two electrodes forming a capacitor, often in the form of two parallel metal plates with insulating material separating them. In the most basic sense, capacitors store electrostatic energy in an electric field. It is possible to detect the amount of liquid inside a container by using capacitive principles, which are explained in more detail below. In response to the movement of a liquid inside a container, the dielectric effect of the liquid alters the effective capacitance of a sensing capacitor, which is detected by electronic circuitry connected to the sensor. One plate of the sensor capacitor is a probe placed inside a receptacle, and the other plate of the sensor capacitor is a grounded conductive part of the receptacle. The sensor capacitor is comprised of two plates. The liquid contained inside the receptacle serves as a dielectric between the two plates of the device. Essentially, a capacitor is made up of two electrodes that are electr